Thanksgiving Silverware Holder

-
 It's November and before you know it, Thanksgiving will be upon us.  I've created a pretty little holder for silverware that is sure to dress up the table.
Let me show you how I made it!

This post may contain affiliate links.

Start with a piece of burlap and fray the edges. I can't give you dimensions since everyone has napkins and silverware in different sizes.  Let that be your guide.
To create a smooth edge for the pocket, fold one end over and glue.
Since mine was a bit of a tight fit (the piece of burlap was already cut and I wasn't going to waste it), I placed the napkin inside and glued the edges.  In case you're wondering, no, I did not glue the napkin in place.  Whew!

Time to embellish!  I had some rick rack - an estate sale find, but it was a bit stained in places.
Don't you love the price?

Tea-staining to the rescue!  I used my potato masher to keep it submerged.
Stained and dried, I cut the lengths needed and glued them to the outer edges.
Leaving the napkin inside (remember, it's a tight fit?) a piece of waxed paper was slid inside to prevent any glue from seeping through the loose weave of the burlap.
The waxed paper was removed.
The silverware was added.
All ready for the Thanksgiving table!


Comments

Post a Comment

Popular posts from this blog

Denim Flowers - Two Ways

-
Image
  Two ways, you ask?  read on and you'll see why!  There are lots of ways to make denim flowers and I experimented with two of them.   But, first....  ... i t's time once again for  The Sustainable Pinterest  Challenge , a group of bloggers who are challenged to recreate a pin from Pinterest focused on sustainability. Many thanks to  Julie from Sum of Their Stories  &  Gail from Purple Hues and Me  for hosting.  This month the theme is flowers and I was inspired by this pin , so let's start with the first one that looks like a rose, my all-time favorite flower! I cut a piece of denim and started cutting out petals.   As you can see, I made a couple of patterns and I also cut a strip of denim for the center.  I brushed on a 50/50 mix of Mod Podge and water to give the denim some stiffness for shaping the leaves. I left them to dry overnight. The edge of the denim strip was folded over and rolled on a toot...
Read more

A Glass Bowl Christmas Tree in 5 Easy Steps

-
Image
Have you seen the Christmas trees made from glass bowls?  They seem to be popping up all over the internet and I've got all the details on making one of your own.  In 5 Easy Steps! That's right, five. In all honesty, you can really get it done in three. Although, the last two are the ones that make it absolutely gorgeous.   Let's get started, shall we? W elcome to the 'Do It Over' Designers blog hop.  We are a group of bloggers who love to recycle/upcycle/DIY.  I'm happy to host this hop and I hope you'll visit everyone to see what they have to share with you. The links will be listed at the end of this post. This post may contain affiliate links. Step 1:  Find Your Glass Bowls First, do NOT use real crystal!  That's right, no going to Grandma's house and taking the crystal from her hutch or china cabinet.  Not only will she probably chase you down and beat you with her cane, it's just wrong to use real crystal for a project like this o...
Read more

The Book Witch

-
Image
This project began over the summer and was inspired by a Christmas project from when I was a little girl.  Who remembers making angels from the Montgomery Ward catalog?  Folded pages, silver spray paint, and a styrofoam ball for the head?  Sound familiar? I decided to make a Halloween version using an old book.   Behold, the Book Witch! Little did I know Book Witches were 'a thing' until I started talking about them and Pinterest started listening.  Guess what started showing up all over my feed?  They used wooden balls for the head and pipe cleaners for hair and arms but I made mine a little differently using materials I already had stashed away. W elcome to the 'Do It Over' Designers blog hop.  We are a group of bloggers who love to recycle/upcycle/DIY.  I'm happy to host this hop and I hope you'll visit everyone to see what they have to share with you.  Their links will be listed at the end of this post. I used a book that had seen be...
Read more

Wine Bottle Wind Chime

-
Image
As promised, it's time to share my first project made with my new bottle cutter.  I loved the color of this bottle and immediately had a plan for it.   The first thing you need to know about cutting bottles is that it is a learning curve and there's a LOT of trial and error, as illustrated by this photo: The first two bottles I tried to cut ended up like this.  They started to crack along the etched line and then they didn't.  This is the bottle cutter I use.   By the third bottle, I had the hang of it and this was the result: After the bottle was cut, I sanded the edges until they were smooth.  Then it was time to make a windchime! I wanted a nice soft sound, so I found this wooden egg.  Two holes were drilled into either side and metal eyes were screwed in. I thought about glass pieces, but we can get some pretty strong winds around here and I didn't want glass shards flying through the air! Next came the chain and key...
Read more